What is the reason why the wireless bridge signal weakens?

Some users are very worried about the wireless bridge in the consultation of our company's wireless bridge, the signal will suddenly become weak after using for a period of time, because the previous use of other brands of wireless bridges did encounter such a situation, for users This type of problem, today Teng Yuan Chi extension small series for everyone to popularize the use of wireless bridges for a period of time after the signal weakened what are the reasons!
In general, there are the following reasons why a wireless bridge loses its signal after a period of use:
1, wireless bridge equipment quality problems
The wireless bridge equipment has poor hardware. After a certain period of use, the transmission function of the wireless bridge equipment will be greatly reduced. Severe disconnection and automatic restart will occur. Some companies use their wireless bridges to exaggerate their own words, or present their transmission data in some ideal environments. However, in actual applications, it is impossible to achieve the transmission distance or bandwidth in an ideal environment.
Wireless bridge
2. Obstacle interference
Sometimes when wireless bridge equipment is set up, the transmitting end and the receiving end are open and unobstructed. However, in the course of use, due to the needs of some projects, some buildings or facilities can be established between them, which hinders the wireless network. Bridge signal transmission. Causes the signal to become weak or interrupted. The solution at this time avoids these shields. Common methods include erecting wireless bridges and adding relay points.
3, wireless bridge angle deviation
Everyone knows that wireless bridges are point-to-point transmissions. Under the premise of directional antenna alignment angle, the signal can reach the ideal state, the longer the transmission distance, the higher the accuracy of its angle. Or the bridge is not firmly fixed during installation, resulting in severe weather such as strong winds. The position of the wireless bridge antenna is loose and the angle cannot be aligned. Therefore, during the installation process, the professional manufacturer must be found to install it.
4, interference with the same frequency equipment
Wireless bridges have frequent 2.4G wireless bridges and 5.8G wireless bridges. The development of 2.4G wireless bridges has resulted in an earlier deadlock, and there are many applications in the market, so it is easy to encounter signal interference from such frequency equipment. Causes the signal to weaken. Therefore, to reduce this phenomenon, Xiaobian recommends that users use 5.8G wireless bridges to reduce interference.
Tengyuan Zhituo has been focusing on the R&D and application of wireless transmission products for 12 years. The company's wireless network bridge has military-grade quality. The chip uses the US Qualcomm chip, which has very strong anti-interference ability and good stability. It is ideal for use in harsh outdoor environments. For more information on Welcome to Tengyuan Zhituo, we will give you more detailed knowledge of wireless bridge knowledge.

CNC busbar servo bending machine is the computer-controlled equipment dedicated for busbar bending, performing various bending operations through the coordination of X-axis and Y-axis movements, assisted with manual feeding. The selection of different dies can complete the plane bending, side bending and other processes of busbar. The machine can be used in combination with GJ3D software, and is able to accurately calculate the spread length of the bend. As to the frequently bent workpiece, it can automatically find the bending order to achieve programming automation, simulate the bending order to place busbar and avoid errors in determining the bending positions.

Busbar Machine

Busbar Machine,Busbar Punching and Shearing Machine,Busbar Shearing Machinery,CNC Busbar Bending Machine

JINAN EURO-ASIA INT'L CO., LTD , https://www.eaelectricmachine.com