More than 10,000 hours of time test made me a Liugong iron powder

The first chapter of my old hero 908C

From 11 years to now, my Liugong 908C has been with me for 7 years. In the past few years, my 908 has really given me a lot of face. The three major pieces are not leaking oil. It turns out that you love it. It, it also cherishes you. Now more than 11,000 hours, work is still full of energy. (It is reported that this 908 has been working for more than 4,000 hours later)

挖掘机908c
My old hero 908C

我的老功臣908C
Excavator 908C

Considering that there are many problems with used cars, there are many problems. It has also opened domestically produced Xiagong and Revo. I feel that the domestic machine is not as bad as I thought. I bought Xiagong and Xugong when I bought it, but in the end I chose Liugong 908c for some reason. During this period, mainly the work of doing some earthwork.

车内实景
Real scene inside the car

From the 11 years to the present, there have been no major problems in the three major pieces. Then the middle arm and the boom oil seal were changed once, the chain gold, the guide wheel, the drive teeth were replaced with new ones, and the maintenance was self-maintenance, generally five hours on time. About once, it is about two hundred dollars. This car because the engine is Cummins, the fuel consumption should be slightly higher. About 1 hour in about 1 hour, a barrel of oil can be used for more than 20 hours.

工作中的908c
908c at work

It is said that the biggest advantage of Liugong is that it is resistant to exercise. After the chassis has been changed, nothing else has been moved. Very playable quality is still possible. The biggest drawback is that the movement is a bit slow, the others are quite good, and then walking will be a little weak, these few work is very powerful, the other is nothing.

康明斯的发动机
Cummins engine

The quality of Liugong is better, personally think. It has been updated to the present and should be stronger than other brands. So choose domestic, I choose Liugong.

Chapter 2 New Partner 9075E

Now share my Liugong 9075E with everyone. The machine was on the 25th of May, 18th in Shangqiu, and it has been more than a month since the beginning of the year. The work is basically based on earthwork. The township villages are guerrilla, and they are active for 230 hours.

新伙伴9075E
New partner 9075E

In terms of power, the Yanmar engine is 46 kW without supercharger, and the power is absolutely sufficient. Big pump YINLAI, chassis mountain push.

First, let's talk about the advantages. The overall appearance is high, the cab is very large, comparable to other brands of 150 excavator cabs, the field of vision is very wide, the driving action is smooth and coordinated, and the smooth loading of the ground is also very powerful, and some steep slopes are basically No pressure, but it is not recommended because it hurts the motor. The handle is very light, and you won't feel tired when you survive the day. The air conditioner is very powerful, the air outlet is too much, and the air outlet function is provided. The design of the cold storage room is also very user-friendly. The ergonomic design of the seat is also in place, and the seat is very comfortable.

新伙伴9075E工作场景
9075E work scene

Fuel consumption, the 9075E has two working modes, which are divided into P heavy load mode and E economic mode to meet different working conditions. I usually use E mode 6 grid oil average fuel consumption 4 to 5 liters a tank of oil can be used for about 26 hours. (In short, the overall is not a little bit more than a half star than my previous 908c).

In terms of service, the after-sales service is very enthusiastic. If you don't understand the local answer, it is also very comprehensive. It is very satisfying to solve the problem with a word "fast".

愿民族品牌畅享世界,争做一流,愿柳工蒸蒸日上,再创辉煌
I hope that national brands will enjoy the world and strive to be first-class. I hope that Liugong will flourish and create more glory.

Let's talk about the shortcomings. The noise of this Yanmar engine really dare not be underestimated. Open the door and work hard for a day. That's why I can't stand it. It's much better to close the door (the mute effect of the 9075E cab is really unusual), isn't the Yanmar engine like this?

Secondly, the paint surface is not thick and the feeling is very thin. In some places, the paint is cracked. There is also a shovel to release the pressure quickly, and most of the time it will be in the end. When working, I always unconsciously mention the dozer blade. After the sale, I said that there is no shut-off valve installed to protect the bulldozer. Shovel cylinders and hydraulic tubing, okay, let's believe it for a while, it doesn't affect normal use anyway.

Write down the feeling when you wait 1000 hours.

There is no comparison with other brands from beginning to end, because radish cabbage has its own love.

I hope that national brands will enjoy the world and strive to be first-class. I hope that Liugong will flourish and create greater glories. (This article is from Liugong)

Related News: Liugong Excavator User Usage Report

 Cover tape extenders are used when a reel of SMD components doesn`t have a leader at the beginning of the reel. The tape extenders add an additional 508mm (20") of tape as a leader and feed into SMT Placement Equipment as a piece of cover tape. These tape extenders reduce the loss of components when you have no leader tape to work with.Can be used with either paper or plastic tape, punched or formed pockets, from 8-44mm width.

SMT-1108 SMT Super Cover Tape Extender 8 & 12mm     5mm * 396mm   500pcs/box For 8 & 12mm carrier tape

SMT-1116  SMT Cover Tape Extender 16mm 9.1mm * 396mm 500pcs /box For 16mm carrier tape

SMT-1124  SMT Cover Tape Extender 24mm  18mm * 396mm 250pcs /box For 24mm carrier tape

SMT-1132 SMT Cover Tape Extender 32mm  26mm * 396mm 250pcs /box  For 32 & 44mm carrier tape

SMT Cover Tape Extender

SMT Cover Tape Extender,Tape Extender for SMT,Yellow Carrier Tape Extender,SMT Tape Extender

ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com