China-Alloy-Scraper-for-Painting-From-China

TUNGSTEN CARBIDE SCRAPER FOR PAINT

REPLACEMENT OF TUNGSTEN CARBIDE BLADE FOR SCRAPER

TUNGSTEN CARBIDE TOOL FOR PLANER BLADE

WE CAN CUSTOMIZE DIFFERENT PACKING OR DESIGN FOR OUR TUNGSTEN CARBIDE SCRAPER,
OUR PRODUCTS ARE SOLT TO DIFFERENT COUNTRIES WITH VERY GOOD QUALTY!

TX Grade Grade ISO Grade Hardness Density Bending Strength Recommended Application
T100X YG6X K10-K15 91-93 14.8-15 ≥1600 Suitable for little stress conditions, produce for small diameter steel wire, non-ferrous metal wire or rod.
T100 YG6 K10-K20 90.5-92 14.8-15 ≥2000  Suitable for large stress conditions, produce for medium diameter of steel wire, non-ferrous metal wire or rod.
T200 YG8 K20-K30 89.5-91 14.6-14.8 ≥2100 Suitable for steel, non-ferrous metal and alloy rod and tube,and is suitable for manufacturing machinery parts, tools materials and wear parts
T200C YG8C K20-K30 89-90.5 14.6-14.8 ≥2200 Coarse grain size carbide,suitbale for drilling medium hard or hard stratum with f less than 14th and the coal bed containing hard rock;Coal Cutter Bits;Oil Field Bits,and Hammer Drill bits.
T300 YG9 K20-K30 87.5-89 14.3-14.5 ≥2200 With good good resistance, impact resistance and good shock resistance, suitable for carbide drills, drill pills.
T300C YG9C K20-K30 87.2-88.6 14.4-14.6 ≥2300 Coarse grain, with good wear resistance, suitable for drilling hard rock.
T400 YG10 K20-K30 87-88.5 14.3-14.6 ≥2300 With good abrasion resistance, excellent impact resistance and good shock resistance, suitable for cemented carbide buttons and flat-tio-serrated compacts.
T500 YG11 K30-K40 89-90.2 14.2-14.5 ≥2300 With good wear resistance, suitable for producing nail making moulds,nails specially for cement industry
T500C YG11C K30-K40 86.5-88 14.2-14.5 ≥2400 Coarse grain, with good wear resistance, suitable for drilling hard rock.
T600 YG12 K30-K40 86.5-88 14.1-14.4 ≥2400 With good toughness, suitable for making steel pipe, steel, non-ferrous metal and alloy rods, bars,tubes
T700 YG15 K40 87-88.5 13.9-14.2 ≥2400 Low wear resistance, high bending strength and impact toughness. Suitable for cemented carbide dies,stamp dies and mould cores,etc.
T700C YG15C K40 85-86.5 13.9-14.2 ≥2450 With very good impact and shock resistance,suitable for tungsten carbide dies and mould cores,etc.
T800 YG20
83-85 13.4-13.6 ≥2700 Suitable for wear parts, plates and mechanical parts.
T800C YG20C
82.5-84.5 13.4-13.6 ≥2700 Suitable for cold heading moulds,cold punching moulds and cold rolls for standard parts and tools in various industries.
TN100 YN6
90.5-92.5 14.8-15.1 ≥1700 With good corrosion resistant,excellent wear resistance,suitable for mechanical seal parts.
TN200 YN7
90-92 14.7-14.9 ≥1800 With good corrosion resistant,excellent wear resistance,suitable for mechanical seal parts.
TN300 YN10
86-88 14.3-14.6 ≥2000 With good corrosion resistant,suitable wear resistance.
TX35T

93-95 7.9-8.1 ≥1700 With good corrosion resistant,suitable wear resistance.
Our Service:
Tungsten carbide SCRAPER

Tungsten carbide rings for sealing
1.100% raw material
2.trial order accept
3.Semi-finish or finished both are OK!
                                                                                                                                                                                                                                                                                              Â