PPR Pipe Fitting Elbow Mould

  • Shaping Mode: Injection Mould
  • Mould Cavity: Multi Cavity
  • Process Combination Type: Single-Process Mode
  • Runner: Cold Runner
  • Installation: Fixed
  • Customized: Customized
  • Trademark: JZ
  • Specification: ISO9001: 2000
  • HS Code: 8480719090
  • Surface Finish Process: Polishing
  • Plastic Material: PPR
  • Application: Commodity
  • Design Software: AutoCAD
  • Standard: HASCO
  • Size: 25mm
  • Transport Package: Wooden Case
  • Origin: China
PPR Pipe Fitting Elbow Mould
PPR Pipe Fitting Elbow MouldPPR Pipe Fitting Elbow MouldPPR Pipe Fitting Elbow MouldPPR Pipe Fitting Elbow MouldPPR Pipe Fitting Elbow Mould
High quality with reasonable price
Name PPR Pipe Fitting Elbow Mould
Plastic material PPR
Steel of Cavity & Core DIN 1.2738
Steel of Mouldbase S50C. LkM standard^ etc
Nos of Cavity Customized
Hardness of Cavity & Core 48-52HRC
Hardness of Wear Parts 55-60HRC
Core pulling system Motor /oil cylinder/ stripping plate, angel pin^ etc
Mould Accessories DME/HASCO Standard
Cooling system In core baffle cooling and in cavity plate chain drilling type cooling
Surface finish Diamond polish
Molding   life 1.200, 000shots
Runner Cold
Delivery time 55 work days
Packing wooden case
Payment  T/T L/C

Living garbage disposal equipment

With the development of increasingly urbanization , the amount of garbage increased geometrically. Incineration method gradually lost the market since the dioxin and toxic produced by incineration causing irreversible effects on the environment, and for landfill, some garbage is difficult to degrade, which even takes hundreds of years, we cannot afford this even though China has a vast territory, because land is a valuable non renewable resources.

After continuous efforts, Shangqiu Jinpeng industrial Co., Ltd developed a special biomass pyrolysis equipment for domestic waste treatment. After treatment by the equipment, can get about 20% of the oil profits from domestic waste, and in the process, through the low temperature anaerobic biomass pyrolysis of domestic waste harmless treatment, to ensure environmental health.

Living Garbage Processing Equipment 

Flow chart for living garbage disposal equipment

Garbage Processing Equipment 

Living garbage disposal equipment has two system:

1. Garbage Sorting System

The equipment is applied to separate organic waste and inorganic waste from large-size refuse and processing them separately.

 

2. Biomass Pyrolysis Equipment

 

2.1 The combustible waste after sorting and shredding such as life rubber, plastics and knitted fabrics is conveyed into the low-temperature and anaerobic biomass decomposing processor. Through catalyzing and heating, oil gas is produced and then condensed into oil mixture by condenser. The remaining that can`t be liquefied is processed through gas purification system and then used to generate electricity by gas generator. The smoke after burning goes into smoke scrubbers so as to remove acid gas and dust, and then is discharged through chimney when it reaches relevant environmental standards. The residue from biomass decomposition is conveyed into carbon black collecting tanks through sealed screw, without any pollution.

 

 

2.2  The technical parameter of Biomass Pyrolysis Equipment

 NO.

            ITEM

Technical Parameter

1

Suitable Raw Materials

   Small pieces of Waste tire, rubber, waste plastic≤5cm

2

Operating Mode

Fully Continuous Operation

3

Structure

Horizontal Type Revolve

4

Loading and discharging

Fully automatic feeding and discharging under high temperature at same time

5

Capacity(24h)

20-40Mt

6

Work Pressure

Slightly Negative Pressure

7

Oil Yield of tyres

40%-45%

8

Reactor Rotational Speed

1R/M

9

Installation Power

110kw/h

10

Cooling Method

Cycle water

11

Type of Drive

Sprocket Wheel

12

Heating Method

Direct

13

Noise dB(A)

≤85

14

Main Reactor Weight (MT)

About 20Mt

15

Total Weight(MT)

About 45Mt

16

Installation Space Required

60m*20m

17

Manpower

2/shift

18

 Shipment

5*40HQ

19

 Delivery time

≤70Days

 

 

 

Living Garbage Processing Equipment

Municipal Waste Recycling,Garbage Recycling Machine,Waste To Energy

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl