Automobile Bearing, Timken Wheel Hub Taper Roller Bearing Hm518445/Hm518410 Equvialent Koyo NSK NTN 518445/10, 518445/518410

Model NO.: HM518445/HM518410
Brand: Ikc SKF NSK NTN Koyo Timken
Car Make: All Cars
Delivery: Stock
Trademark: IKC SKF NSK NTN KOYO NACHI IKO TWB HRB TIMKNE
Transport Package: Single Box, Plastic Tube
Specification: CE, RoHS, SGS, GMP
Origin: China, Japan, Germany, Sweden, France
HS Code: 8482102000
Model NO.: HM518445/HM518410
Brand: Ikc SKF NSK NTN Koyo Timken
Car Make: All Cars
Delivery: Stock
Trademark: IKC SKF NSK NTN KOYO NACHI IKO TWB HRB TIMKNE
Transport Package: Single Box, Plastic Tube
Specification: CE, RoHS, SGS, GMP
Origin: China, Japan, Germany, Sweden, France
HS Code: 8482102000
Automobile Bearing, Timken Wheel Hub Taper Roller Bearing Hm518445/Hm518410 Equvialent Koyo NSK NTN 518445/10, 518445/518410

Taper roller bearings

HM518445/HM518410		 - 88.9 152.4 39.688
HM516449/HM516410 - 82.55 133.35 39.688
HM266449/HM266410 - 384.175 546.1 104.775
HH923649/HH923610 - 101.6 250.875 76.2
HH506348/HH506310 - 49.212 114.3 44.45
HH249949/HH249910 - 247.65 406.4 115.888



Tapered roller bearings are bearings that can take large axial forces (i.e., they are good thrust bearings) as well as being able to sustain large radial forces.
 
The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing.
This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. When a roller slides rather than rolls, it can generate wear at the roller-to-race interface, i.e. the differences in surface speeds creates a scrubbing action. Wear will degenerate the close tolerances normally held in the bearing and can lead to other problems. Much closer to pure rolling can be achieved in a tapered roller bearing and this avoids rapid wear.
The rollers are guided by a flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum.
The larger the half angles of these cones the larger the axial force that the bearing can sustain.
Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the cone, and the outer ring is called the cup. Internal clearance is established during mounting by the axial position of the cone relative to the cup.
Metric tapered roller bearings follow the designation system defined by ISO 355.
 History
In 1898, Henry  was awarded a patent[1] for the tapered roller bearing. At the time, Taper roller bearing was a carriage-maker in St. Louis and held three patents for carriage springs. However, it was his patent for tapered roller bearings that allowed his company to become successful.
   Henry were a breakthrough at the end of the 19th century because bearings used in wheel axles had not changed much since ancient times. They relied on bearings enclosed in a case that held lubricants. These were called journal bearings and depended on lubricants to function. Without proper lubrication[2], these bearings would fail due to excessive heat caused by friction.  Henry was able to significantly reduce the friction on his bearings by using a cup and cone design incorporating tapered bearings which actually rolled, which reduced the load placed on the bearings by distributing the weight and load evenly across the cups, cones, and bearings.
 Applications
In many applications tapered roller bearings are used in back-to-back pairs so that axial forces can be supported equally in either direction.
Pairs of tapered roller bearings are used in car and vehicle wheel bearings where they must cope simultaneously with large vertical (radial) and horizontal (axial) forces. Applications for tapered roller bearings are commonly used for moderate speed, heavy duty applications where durability is required. Common real world applications are in agriculture, construction and mining equipment, axle systems, gear box, engine motors and reducers.
 
Item details
 
 

30202		 7202E 15 35 11 14.9 13.4 12000 16000 0.053kgs
30244 7244E 220 400 73 - - - - 35.5
30340 7340E 200 420 80 1120 1450 820 1100 53.5
30352 7352E 260 540 114 - - - - 108
32205 7505 25 72 24.25 - - - - 0.174
30302 7302E 15 42 13 22.8 21.5 9000 12000 0.094
30203 7203E 17 40 12 20.8 21.8 9000 12000 0.079
30303 7303E 17 47 14 28.2 27.2 8500 11000 0.129
32303 7603E 17 47 19 31.9 29.9 9400 13000 0.17
32904 2007904E 20 37 12 13.2 17.5 9500 13000 0.056
32004 2007104E 20 42 15 25 28.2 8500 11000 0.095
30204 7204E 20 47 14 28.2 30.5 8000 10000 0.126
30304 7304E 20 52 15 30.5 28.4 8300 11000 0.17
32304 7604E 20 52 21 42.8 46.2 7500 9500 0.23
329/22 - 22 40 12 15 20 8500 11000 0.065
320/22 20071/22E 22 44 15 26 30.2 8000 10000 0.1
32905 2007905E 25 42 12 16 21 6300 10000 0.064
32005 2007105E 25 47 15 28 34 7500 9500 0.11
33005 3007105E 25 47 17 32.5 42.5 7500 9500 0.129
30205 7205E 25 52 15 32.2 37 7000 9000 0.154
33205 3007205E 25 52 22 47 55.8 7000 9000 0.216
30305 7305E 25 62 17 46.8 48 6300 8000 0.263
31305 27305E 25 62 17 40.5 46 6300 8000 0.262
32305 7605E 25 62 24 61.5 68.8 6300 8000 0.368
329/28 - 28 45 12 16.8 22.8 750D 9500 0.069
320/28 20071/28E 28 52 16 31.5 40.5 6700 8500 0.142
332/28 30072/28E 28 58 24 58 68.2 6300 8000 0.286
32906 2007906E 30 47 12 17 23.2 7000 9000 0.072
32006X2 2007106X 30 55 16 27.8 35.5 6300 8000 0.16
32006 2007106E 30 55 17 35.8 46.8 6300 8000 0.17
33006 3007106E 30 55 20 43.8 58.8 6300 8000 0.201
30206 7206E 30 62 17.5 43.2 50.5 6000 7500 0.231
32206 7506E 30 62 20 51.8 63.8 6000 7500 0.287
33206 3007206E 30 62 25 63.8 75.5 6000 7500 0.342
30306 7306E 30 72 21 59 63 5600 7000 0.387
23334 7634 170 360 120 - - - - -
31306 27306E 30 72 21 52.5 60.5 5600 7000 0.392
32306 7606E 30 72 27 81.5 96.5 5600 7000 0.562
329/32 - 32 52 14 23.8 32.5 6300 8000 0.106
320/32 20071/32E 32 58 17 36.5 49.2 6000 7500 0.187
332/32 30072/32E 32 65 26 68.8 82.2 5600 7000 0.385
32907 2007907E 35 55 14 25.8 34.8 6000 7500 0.114
32007X2 2007117E 35 62 17 33.8 47.2 5600 7000 0.21
32007 2007107E 35 62 18 43.2 59.2 5600 7000 0.224
33007 3007107E 35 62 20 40.8 53.8 6200 8200 0.25
30207 7207E 35 72 17 54.2 63.5 5300 6700 0.331
32207 7507E 35 72 23 70.5 89.5 5300 6700 0.445
33207 3007207E 35 72 28 82.5 102 5300 6700 0.515
30307 7307E 35 80 21 75.2 82.5 5000 6300 0.515
31307 27307E 35 80 21 65.8 76.8 5000 6300 0.514
32307 7607E 35 80 31 99 118 5000 6300 0.763
32908X2 2007908 40 62 14 21.2 28.2 5600 7000 0.14
32908 2007908E 40 62 15 31.5 46 5600 7000 0.155
32008X2 - 40 68 18 39.8 55.2 5300 6700 0.27
32008 2007108E 40 68 19 51.8 71 5300 6700 0.267
33008 3007108E 40 68 22 60.2 79.5 5300 6700 0.306
33108 3007708E 40 75 26 84.8 110 5000 6300 0.496
30208 7208E 40 80 18 63 74 5000 6300 0.422
32208 7508E 40 80 23 77.8 97.2 5000 6300 0.532
33208 3007208E 40 80 32 105 135 5000 6300 0.715
30308 7308E 40 90 23 90.8 108 4500 5600 0.747
31308 27308E 40 90 23 81.5 96.5 4500 5600 0.727
32308 7608E 40 90 33 115 148 4500 5600 1.04
32909X2 - 45 68 14 22.2 32.8 5300 6700 -
32909 7007909E 45 68 15 32 48.5 5300 6700 0.18
32009X2 2007109X 45 75 19 44.5 62.5 5000 6300 0.32
32009 2007109E 45 75 20 58.5 81.5 5000 6300 0.337
33009 3007109E 45 75 24 72.5 100 5000 6300 0.398
33109 3007709E 45 80 26 87 118 4500 5600 0.535
30209 7209E 45 85 19 67.8 83.5 4500 5600 0.474
32209 7509E 45 85 23 80.8 105 4500 5600 0.573
33209 3007209E 45 85 32 110 145 4500 5600 0.771
30309 7309E 45 100 25 108 130 4000 5000 0.984
31309 27309E 45 100 25 95.5 115 4000 5000 0.944
32309 7609E 45 100 36 145 188 4000 5000 1.4
32910X2 - 50 72 14 22.2 32.8 5000 6300 0.7
32910 2007910E 50 72 15 36.8 56 5000 6300 0.181
32010X2 2007110X 50 80 19 45.8 66.2 4500 5600 0.31
32010 2007110E 50 80 20 61 89 4500 5600 0.366
33010 3007110E 50 80 24 76.8 110 4500 5600 0.433
33110 3007710E 50 85 26 89.2 125 4300 5300 0.572
30210 7210E 50 90 20 73.2 92 4300 5300 0.529
32210 7510E 50 90 23 82.8 108 4300 5300 0.626
33210 3007210E 50 90 32 112 155 4300 5300 0.825
30310 7310E 50 110 27 130 158 3800 4800 1.28
31310 27310E 50 110 27 108 128 3800 4800 1.21
32310 7610E 50 110 42.5 178 235 3800 4800 1.89
32911 2007911E 55 80 17 41.5 66.8 4800 6000 0.262
32011X2 - 55 90 22 63.8 93.2 4000 5000 0.53
32011 2007111E 55 90 23 80.2 118 4000 5000 0.551
33011 3007111E 55 90 27 94.8 145 4000 5000 0.651
33111 3007711E 55 95 30 115 165 3800 4800 0.843
30211 7211E 55 100 21 90.8 115 3800 4800 0.713
32211 7511E 55 100 25 108 142 3800 4800 0.853
33211 3007211E 55 100 35 142 198 3800 4800 1.15
30311 7311E 55 120 29 152 188 3400 4300 1.63
31311 27311E 55 120 29 130 158 3400 4300 1.56
32311 7611E 55 120 43 202 270 3400 4300 2.37
32912X2 - 60 85 16 34.5 56.5 4000 5000 0.24
32912 2007912E 60 85 17 46 73 4000 5000 0.279
32012 2007112E 60 95 23 81.8 122 3800 4800 0.584
33012 3007112E 60 95 27 96.8 150 3800 4800 0.691
33112 3007712E 60 100 30 118 172 3600 4500 0.895
30212 7212E 60 110 22 102 130 3600 4500 0.904
32212 7512E 60 110 28 132 180 3600 4500 1.17
33212 3007212E 60 110 38 165 230 3600 4500 1.51
30312 7312E 60 130 31 170 210 3200 4000 1.99
31312 27312E 60 130 31 145 178 3200 4000 1.9
32312 7612E 60 130 46 228 302 3200 4000 2.9
32913 2007913E 65 90 17 45.5 73.2 3800 4800 0.295
32013X2 2007113 65 100 22 67 102 3600 4500 0.63
32013 2007113E 65 100 23 82.8 128 3600 4500 0.62
33013 3007113E 65 100 27 98 158 3600 4500 0.732
33113 3007713E 65 110 34 142 220 3400 4300 1.3
30213 7213E 65 120 23 120 152 3200 4000 1.13
32213 7513E 65 120 31 160 222 3200 4000 1.55
33213 3007213E 65 120 41 202 282 3200 4000 1.99
30313 7313E 65 140 33 195 242 2800 3600 2.44
31313 27313E 65 140 33 165 202 2800 3600 2.37
32313 7613E 65 140 48 260 350 2800 3000 3.51
32914X2 - 70 100 19 53.2 85.5 3600 4500 -
32914 2007914E 70 100 20 70.8 115 3600 4500 0.471
32014X2 - 70 110 24 83.8 128 3400 4300 0.85
32014 2007114E 70 110 25 105 160 3400 4300 0.839
33014 3007114E 70 110 31 135 220 3400 4300 1.07
33114 3007714E 70 120 37 172 268 3200 4000 1.7
30214 7214E 70 125 24 132 175 3000 3800 1.26
32214 7514E 70 125 31 168 238 3000 3800 1.64
33214 3007214E 70 125 41 208 29.8 3000 3800 2.1
30314 7314E 70 150 35 218 272 2600 3400 2.98
31314 27314E 70 150 35 188 230 2600 3400 2.86
32314 7614E 70 150 51 257 315 2700 3600 4.11
32915 2007915E 75 105 20 78.2 125 3400 4300 0.49
32015X2 - 75 115 24 85.2 135 3200 4000 0.88
32015 2007115E 75 115 25 102 160 3200 4000 0.875
33015 3007115E 75 115 31 132 220 3200 4000 1.12
33115 3007715E 75 125 37 175 280 3000 3800 1.78
30215 7215E 75 130 25 138 185 2800 3600 1.36
32215 7515E 75 130 31 170 242 2800 3600 1.74
33215 3007215E 75 130 41 208 300 2800 3600 2.17
30315 7315E 75 160 37 252 318 2400 3200 3.57
31315 27315E 75 160 37 208 258 2400 3200 3.38
32315 7615E 75 160 55 348 482 2400 3200 5.37
32916 2007916E 80 110 20 79.2 128 3200 4000 0.514
32016X2 - 80 125 27 102 162 3000 3800 1.18
32016 2007116E 80 125 29 140 220 3000 3800 1.27
33016 3007116E 80 125 36 182 305 3000 3800 1.63
33116 3007716E 80 130 37 180 292 2800 3600 1.87
30216 7216E 80 140 26 160 212 2600 3400 1.67
32216 7516E 80 140 33 198 278 2600 3400 2.13
33216 3007216E 80 140 46 245 362 2600 3400 2.83
30316 7316E 80 170 39 278 352 2200 3000 4.27
31316 27316E 80 170 39 230 288 2200 3000 4.05
32316 7616E 80 170 58 388 542 2200 3000 6.38
32917X2 - 85 120 22 74.2 125 3400 3800 0.73
32917 2007917E 85 120 23 96.8 165 3400 3800 0.767
32017X2 - 85 130 27 105 170 2800 3600 1.25
32017 2007117E 85 130 29 140 220 2800 3600 1.32
33017 3007117E 85 130 36 180 305 2800 3600 1.69
33117 3007717E 85 140