High Quality Made in China OEM Aluminium Alloy Die Casting

Material: aluminium alloy, zinc alloy
Process: High Pressure Die Casting
Finish:Deburring,Machining
Surface Treatment: Shot blasting, Anodic oxidation,Sand blasting, Painting,Powder coating Application: Auto, construction, industry, electrical power, etc.
Services:OEM/ODM
Certification:ISO9001:2008
Package: Pallet, Carton, Wooden cases, as customer's request

Hot-chamber die casting

Hot-chamber die casting, also known as gooseneck machines, rely upon a pool of molten metal to feed the die. At the beginning of the cycle the piston of the machine is retracted, which allows the molten metal to fill the "gooseneck". The pneumatic- or hydraulic-powered piston then forces this metal out of the gooseneck into the die. The advantages of this system include fast cycle times (approximately 15 cycles a minute) and the convenience of melting the metal in the casting machine. The disadvantages of this system are that it is limited to use with low-melting point metals and that aluminium cannot be used because it picks up some of the iron while in the molten pool. Therefore, hot-chamber machines are primarily used with zinc-, tin-, and lead-based alloys.

Cold-chamber die casting

These are used when the casting alloy cannot be used in hot-chamber machines; these include aluminium, zinc alloys with a large composition of aluminium, magnesium and copper. The process for these machines start with melting the metal in a separate furnace.Then a precise amount of molten metal is transported to the cold-chamber machine where it is fed into an unheated shot chamber (or injection cylinder). This shot is then driven into the die by a hydraulic or mechanical piston. The biggest disadvantage of this system is the slower cycle time due to the need to transfer the molten metal from the furnace to the cold-chamber machine.

 

Sit Up Bench

Sit Up Bench,Sit Up Board,Reverse Sit Up Bench,Adjustable Sit Up Bench

Nantong Hualong Machine Ind. Co.,Ltd , https://www.kingfitness-cn.com