With the development of modern machinery processing industry, the requirements for the quality and precision of cutting have been continuously improved, and the requirements for improving production efficiency, reducing production costs, and having high-efficiency automatic cutting functions are also increasing. As a part of the cutting machine industry, the products we provide will be the most modern and technological. Welcome everyone to discuss cooperation. Details:/ The distance between the machine and the whole machine (usually 1 times the size of the kerf) determines the common side nesting in the public side, affirmatively loading/transforming the sheet size, loading the entire machine, and arranging the entire machine; output NC; Check and inspect cutting points and walking lines of the co-edge machine. After being correct, it may be sent to the cutting machine platform as cut; Shaped glass sealing robot can seal triangle,arc,trapezoid shape glass.It is popular in European country.Shaped Insulating Glass sealant sealing machine is a set of automatic sealing system for double glazing/triple glazing insulating glass. The system also can be sealed for different size of the hollow glass processing. Arc Shape Insulating Glass Sealing Robot,Automatic Igu Sealing Line,Ce Certificate Sealant Sealing Robot,Triple Glazing Igu Sealant Sealing Line JINAN WEILI MACHINE CO LTD , https://www.wgmglassmachine.com
In order to reduce the material loss, the portable CNC cutting machine needs to typeset the cutting parts in order to reduce the material loss during the cutting process. When the similar steps are completed with the nesting software, many users do not have a long time to contact the CNC industry, so for this specific The operation is not well understood:
Each manufacturer may have different nesting software for the portable CNC cutting machine. There are some differences in some functions, but generally it can be done in this way: First, set the location of the outer boundary inlet. In general, this is a reflection of the relationship between thermal deformation and the direction of walking outside. Assuming that the cutting start position is (left lower), the outer boundary is where the incoming line position is (lower right), and the cutting position is where the starting position is, then the outer boundary introduction line place is where the click changes the plate lag parameter;
Then set the CNC cutting machine
In addition to loading the machine must determine the common side nesting, otherwise there will be no co-edge; in the changes to set the file to cut the perforation option in the model, to re-set the end of the common side of the material; when using the common edge of the calendar It is important to note that the location of the lead-in line and the future direction of walking are associated with thermal deformation.
ã€China Cutter Trading Network is now giving back to the old and new members, special advertising space for free experience activities, a golden opportunity, first come first served. Log on to the official website for the latest information:/
Editor: zgqgjjyw