Introduction: The bag dust collector is currently the most widely used dust removal equipment in the dust removal industry. In some special industries, the dust is flammable and explosive. Therefore, we need to carry out some special treatment on the bag filter to achieve the purpose of fire prevention and explosion protection. City Zhicheng Dedusting Equipment Co., Ltd. will explain the precautions of fireproof and explosion protection of bag filter. Information Source: Botou City Haocheng Dedusting Equipment Co., Ltd.
Continuous Waste Oil Distillation Plant
The Continuous Waste Oil Distillation Plant is used to refine waste engine oil, crude oil and fuel oil after pyrolysis process into diesel grade oil, gasoline or and base oil. The daily capacity of this plant is about 10-300 tons.
Advantages of Continuous Waste Oil Distillation Plant
1. Unique manufacturing and technology with our own formula of our equipment in China.
2. High oil output, about 80%-90%.
3. Good quality end product oil as the substitution of standard diesel oil in usage.
4. Security:
A. Adopting automatic submerged-arc welding technology
B. All of the welding will be detected by the ultrasonic nondestructive testing method to ensure the welding quality and the welding shape.
C. Equipped with anti-explosive device, safety valves, emergency valves, pressure and temperature meters, as well as the alarming system.
5. Environmental-friendly:
A. Emission Standard: Adopting special gas scrubbers to remove acid gas and dust from smoke.
B. Smell during operation: Fully enclosed during the operation
C. Water pollution: No pollution at all.
6. Energy conservation and low cost on operation:
Special covers of the reactors and chambers can keep hot during the heating in good efficiency as well as the direct heating system to save energy and cost.
No.
Item
Technical Parameter
1
Suitable Raw Material
used oil, pyrolysis fuel oil, crude oil
2
Structure
Continuous Vertical
3
Chamber Material
16mm Q245R boiled steel
4
Daily Capacity (24H)
30-300MT
5
Condensers
Q235R
6
Fuels Choice
Oil, gas, coal
7
Power
70kw/h
8
Cooling Method
Cycle Water(70M3)
9
Delivery Time
1 month
10
Type of Installation
With foundation
11
Installation Area (m)
25m*35m
12
Noise dB(A)
≤85
13
Operating Mode
Continuous
14
Sync Gas Treatment
Fully burned as fuel
15
Manpower
3~4 per shift
16
Total weight(MT)
100mt
17
Shipment
8*40HC
Continuous Waste Engine Oil Distillation Plant Continuous Distillation,Continuous Distillation Column,Waste Oil Refinery Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com
1. If the gas to be treated is high-temperature gas, use a high-temperature, non-flammable dust filter bag.
2. When dealing with flammable and explosive dust, dust filter bags use high temperature or non-flammable materials.
3. For dust removal systems where there is a risk of burning or explosion dust and flammable debris, use a dust collector that does not generate sparks and static electricity.
4. Dust that can form an explosive mixture when in contact with water. Wet dust removal equipment cannot be used.
5. Set a combustion chamber or Mars trap in front of the bag filter to completely burn unburned dust and gas or trap Mars.
6. The use of explosion-proof motor equipment, the treatment of combustible gases must be installed alarm and automatic parking system.
7. Pay attention to the cleanliness of the workshop and prevent the accumulation of dust in the workshop and dust inside the dust collector so as to avoid spontaneous combustion and explosion of the dust.
8. Set explosion-proof pressure relief vents at the necessary places of the dust removal system to prevent explosions due to excessive pressure. Install lightning protection measures outdoors and install lightning rods.
9. To prevent the sundries in the airflow from hitting the impeller and the casing, sparks must be installed behind the dust collector.
10. The use of measures to prevent static electricity from accumulating for the bag filter shall be added. Each part shall be grounded with a conductive material, or a conductive fiber may be added during the manufacture of the filter material.