A pneumatic tool, air tool, air-powered tool or pneumatic-powered tool is a type of power tool, driven by compressed air, supplied by an air compressor. Pneumatic Tools can also be driven by compressed carbon dioxide (CO2) stored in small cylinders allowing for portability. Pneumatic tools are safer to run and maintain than their electric power tool equivalents, and have a higher power-to-weight ratio, allowing a smaller, lighter tool to accomplish the same task. General grade pneumatic tools with short life span are commonly cheaper and are also called disposable tools in tooling industries while industrial grade pneumatic tools with long life span are more expensive. In general, pneumatic tools are cheaper than the equivalent electric-powered tools.
Air tools were formerly unpopular in the DIY (Do it yourself) market, but are becoming increasingly popular, and have always been ubiquitous in industrial and manufacturing settings.
It is important to know some general specification technical terms used in pneumatic tools while it is also related to how to choose a good air compressor and if the tool can meet your job requirement so that an air tool can be used properly, respectively, Free Speed (rpm), Air Pressure(psi/bar), Air Consumption(cfm/scfm or m3/min), Horse Power(hp), spindle size...etc. Depending on different type of pneumatic tools, there are different specification values that you need to pay attention to. Pneumatic Tools Pneumatic Tools,Pneumatic Cylinder,Pneumatic Fitting,Pressure Gauge Changzhou Edaweld Trading Company Limited , https://www.edaweld.com
In this investigation, Director Wang expressed a keen interest in the Sanchuan Wisdom Internet of Things meter and its intelligent management system, and put forward sound opinions on the communication module and transmission system of the Internet of Things meter. Wang Zhuren said: Product technology is an inevitable trend, but there is not necessarily a market for technology, and the development of science and technology must rely on market demand and user choice to develop.
Later, Director Wang and his delegation watched the valve control operation of the Internet of Things meter, and made valuable suggestions on the design of the water meter cover. He highly praised Sanchuan’s leading international R&D technology and broad market prospects.
General Manager Li Qiangzu thanked Director Wang for his encouragement and stated that he will earnestly implement forward-looking recommendations of Director Wang, continue to do a good job in scientific and technological innovation of enterprises, drive the industry's rapid, steady, and intelligent development, and strive to create a user-first, quality The priority water meter production base is making unremitting efforts for human scientific water use and healthy drinking.
(Original title: Deputy Director of the Electronic Science and Technology Committee of the Ministry of Industry and Information Technology research Sanchuan Wisdom)
Flow or airflow, related to air consumption in pneumatic tools, represents the quantity of compressed air that passes through a section over a unit of time. It is represented in l/min, m3, at the equivalent value in free air in conditions of standard reference atmosphere (SRA), i.e. +20 c, 65% of relative humidity, 1013 mbar, in accordance with norms NFE.
The Electronic Science and Technology Committee of the Ministry of Industry and Information Technology went to Sanchuan to investigate the Internet of Things meter
On the morning of October 17, 2016, Wang Jianzhang, deputy director of the Electronic Science and Technology Committee of the Ministry of Industry and Information Technology, came to Sanchuan Wisdom Technology Co., Ltd. to research and study. Mr. Gao Hua, Director of Industry and Information Committee of Yingtan City, Jiangxi Province and Secretary Zhou Xin of High-tech Zone, Director Li Weiguo and other leaders accompanied. Sanjiang Wisdom General Manager Li Qiangzu received Director Wang and his entourage, and accompanied them to visit the Sanchuan Wisdom Showroom, detailing the company's development history, core products and technologies, and future development directions.