Non-cyanide leaching agents include thiourea, oxygen, bromine , iodine , ammonia, thiocyanate, and stone sulphur. (1) Thiourea method This method dissolves gold under acidic conditions with high speed, no toxicity, selectivity is better than cyanide, and is not sensitive to base metal impurities. It is used to treat some gold-containing materials, such as anode mud and gold-bearing uranium ore. Dipping and sulfuric acid slag have certain advantages, but the consumption of the medicinal agent is high, the leaching equipment is easy to corrode, and an effective method for recovering gold from the thiourea solution is lacking. In 1997, it was found that sodium sulfite can inhibit the irreversible decomposition of alkaline thiourea to a certain extent, promote the dissolution of gold, and can choose to dissolve gold from gold-containing waste. It is considered that sodium silicate is an efficient way to extract gold from basic thiourea. stabilizer. (2) Halogen and its halogen salt method The reagents used in this method are mainly chlorine, bromine, iodine, chloride salt, iodide, bromide, etc., for example, chlorine gas, hypochlorite, chloride salt method, K reagent, Geobrom 3400 An oxidizing agent such as Bio-D reagent. Chlorine is used as an oxidant and as a complexing agent to form AuCl 3 2- in the leaching process. The halide ion (X - ) is a strong ligand of Au + and Au 2+ . The chlorination leaching method is suitable for the treatment of arsenic-containing carbon materials. gold ore, antimony slag, re-election of gold concentrate containing arsenic pyrite gold ore. The bromination method is one of the most promising leaching processes for replacing cyanide gold. It has the advantages of low price, high leaching rate, fast leaching speed, non-toxicity, no corrosion, recycling of chemicals, and recovery of gold from precious liquid. Convenient and so on. There are many studies on iodide in foreign countries. The leaching rate of iodine-iodide solution can obtain higher gold leaching rate than cyanide method. It is also possible to directly deposit gold from iodine-iodide. (3) Nitrile method This method extracts gold using three nitriles of malononitrile (also known as acyl cyanide), cyanoacetamide and acetonitrile. When treating carbonaceous gold ore, the nitrile gold leaching rate is much higher than the cyanidation method. When oxidizing ore and sulfide ore are treated, the gold leaching rate is as effective as cyanide leaching, but the price is higher. (4) Biological preparation method That is, microorganisms can leach gold, which is related to microbial cell component proteins and microbial metabolite amino acids (glycine, histidine, aspartic acid, etc.). The protein and gold form a negatively charged complex that is linked by the nitrogen atom of the amino acid group to form a stable gold complex. (5) Coal gold agglomeration method This method is to use the flotation agent to improve the hydrophobic character of the surface of the gold particles, and the hydrophobic gold particles enter the agglomerate by the collision action during the stirring process. The gold-bearing agglomerates undergo secondary recycling, enrichment and ashing, and the obtained toluene is subjected to smelting or other methods to obtain finished gold. (6) Polysulfide method and stone sulphur mixture method This method leaches gold and silver by using a reagent formed by the reaction of sulfur and lime. The polysulfide chelating ions are S 2 2- , S 3 2- , S 4 2- , S 5 2 - and the like, they have a strong complexing ability of metal ions in a suitable oxidizing agent (e.g. potassium permanganate, etc.) with the next, or by means of disproportionation polysulfide ions, can effectively dissolve gold and silver. (7) Other methods Other methods include humic acid method, FM reducing reagent method, and thiosulfate method.
TWZ Series Horizontal Vibrating Centrifuge
Product introduction
The series product has sieve basket diameter of 850mm~1,500mm, and is mainly used for dehydration of blocky clean coal, middlings and other similar materials, with 0.5mm~50mm designed feeding granule. It has advantages of small initial investment and floor area, low energy consumption, good dehydration effect, low coal crushing rate, long sieve basket life, convenient operation and maintenance and low noise, and sieve interval of 0.25, 0.3, 0.35, 0.5, etc.
Company Introduction
Luoyang Hong Xin Heavy Co., LTD. is located in Luoyang Xin'an Industrial Park, Luoyang Hongxin Heavy Machinery Co., Ltd is an enterprise featured with industrial designing, processing and manufacturing, which is qualified for import-export trade. Covering an area of 15,000 square meters and holding an annual production value of 80 million RMB, the company of 20 million RMB registered capital has total 100 staff members, among which there are 20 engineering technicians owning senior and medium professional titles and 40 intermediate and senior technicians capable of product designing and developing.
Hongxin is dedicated to produce reducers, hoists, crushers, Ball Grinding Mills and the equipments of screening, coal washing, metallurgy and cement, and replacement parts. Meanwhile, we provide the perform maintenance service for various series of equipments. There are 52 large-scale equipments applied into the manufacturing process, such as T200 CNC floor boring and milling machine, YK 73125 CNC molding gear grinding machine, YK322B CNC molding gear grinding machine, Y3200 gear hobbing machine, Y1600 CNC gear sharper, 4m vertical lathe, 6.3m CNC vertical lathe, T110 CNC boring machine, and 52 middle-sized productive and assistive equipments, which integrate strong manufacturing and processing capability with complete managing system of production and technology, quality management system and comprehensive testing measures.
Certificates
Contacts
TWZ Series Horizontal Vibrating Centrifuge Horizontal Vibrating Centrifuge,Horizontal Scraper Vibrating Centrifuge,Horizontal Vibrating Salt Centrifuge,Horizontal Airflow Centrifugal Luoyang Hongxin Heavy Machinery CO., TLD. , https://www.hxreducer.com
Main method of gold extraction by non-cyanide method for gold ore beneficiation
Cyanide is the most common method and the most stable way to gold and silver ore extraction material, however, there are also time leaching (leaching cycle) long (one week to one year heap leaching, agitation leaching is 24 to 72 hours), and the organic Carbon, antimony , arsenic , copper , zinc and other harmful elements are quite sensitive, which causes a significant reduction in the leaching rate of gold and silver, and a significant increase in production costs. In particular, the cyanide is highly toxic and harmful to the environment. Therefore, how to improve the leaching rate of gold and silver, reduce the cost, and find new technologies and processes that are non-toxic or less toxic to replace highly toxic cyanide is an important research topic.