Different types of Karlsson Coulometer Moisture Analyzer

The Karlsson Coulometric Moisture Analyzer is applicable to the determination of moisture in a variety of organic and inorganic materials. Due to the differences in the properties of various compounds, it can be classified into two types: direct measurement and direct measurement. The following substances are typical.

1. Hydrocarbons: pentane, hexane, dimethylbutane 2, oils: hydraulic oil, insulating oil, transformer oil, turbine oil, etc. 3. Alcohols: monohydric alcohols, polyhydric alcohols, phenols ( All)

4, halogenated hydrocarbons (all)

5, phenols: phenol, cresol, fluorophenol, chlorophenol, dichlorophenol, nitrophenol, etc. 6, lipids: (all)

7. Ethers: diethyl ether, diethylene glycol monomethyl ether, diethylene glycol diethyl ether, polyethylene oxide, anisole 8, acid: carboxylic acid, carboxylic acid, amino acid, sulfonic acid 9, acid anhydride and acid halide: Acetic Anhydride, Benzoyl Chloride 10, Sulfur-containing Compounds: Sulfides, Thiocyanates, Thioethers, Sulfonates, Disulfide Carbamates, and Carrageenans Quantitatively Reacted: Metal Hydroxides and Oxides, Carbonate and acid carbonate, chromic acid and dichromic acid, cobalt ammine complex, ferric chloride, methyl silanol R3SiOH, hydroxylamine, thiosulfate, tin dichloride.

Iodine reaction with Carter's reagent: boric acid and oxides, ascorbic acid, mercaptan and so on.

Quantitatively reduced by HI: copper chloride and sulfate, hydrazine, diacyl peroxide, and the like.

Incomplete reaction: lead acetate, basic ammonia, hydrogen sulfide and sodium sulfide, phosphomolybdic acid, zirconium dichloride and so on.

SZS Steam Boiler

SZS series boiler is designed with longitudinal double drums and " D " type chamber structure. Furnace is placed on the right and convection tube bank is on the left, super heater is arranged at convection tube bank. The body is fixed on the basement by middle and both end flexible supports and make the boiler expand horizontally sideways. Around the furnace is membrane water cooling tube wall. Furnace and tube bank are totally separated by the membrane water tube cooling wall at the left side of the furnace. The back part of bundle is sparse shift structure, front part is aligned structure. Smoke from furnace outlet enters re-burning chamber, convection tube bank area and then from left front part enters spiral fine coil economizer and condenser, and finally is discharged to atmosphere through chimney.

WUXI ZOZEN BOILERS CO.,LTD. , https://www.cnzozen.com