Iron Castings -- Cast Iron Automotive Parts
Main products include connecting rod, steering knuckle, brake block, brake drum, brake disc, gearbox parts, chassis structure parts, pressure plate and so on.
Material allowed: common grey iron and ductile iron, high customized chemical Cast Iron (SiMo ductile iron, high chrome casting iron)
The most common used grey iron is HT200 and HT250, ductile iron is QT400 and QT500.
Equipped with advanced manufacturing equipments including 6 automatic molding lines, 22 sets electric furnaces, 120 sets machining equipments, and advanced inspection equipments and so on.
Cast Iron Automotive Parts Cast Iron Automotive Parts,Auto Parts,Engine Parts,Ductile Iron Casting Parts Dandong Hengrui Machinery Co., Ltd. , http://www.hrcastings.com
Air compressor installation location selection
1. When installing the air compressor, it is necessary to have a wide lighting area for operation and maintenance.
2. The relative humidity of the air should be low, the dust is small, the air is clean and well ventilated, away from inflammable and explosive, corrosive chemicals and harmful unsafe items, avoiding places close to the dust.
3. When the air compressor is installed, the ambient temperature in the installation site should be higher than 5 degrees in winter and lower than 40 degrees in summer, because the higher the ambient temperature, the higher the air compressor discharge temperature, which will affect the performance of the compressor. If necessary, ventilation or cooling devices should be installed at the installation site.
4. If the factory environment is poor and there is a lot of dust, pre-filtering equipment must be installed.
5. The air compressor unit in the air compressor installation site should be arranged in a single row.
6. Reserved passages, those with conditions can install a crane to facilitate maintenance of air compressor equipment.
7. Reserve maintenance space, at least 70 cm or more between the air compressor and the wall.
8. The air compressor is at least one meter away from the top space.